The clutch is one of the most important components on a bike. It’s responsible for connecting the transmission to the rear wheel and spinning the chain rings, so it’s imperative that it’s working properly. And if it’s not aligned correctly, you can cause serious wear and tear on your chain, cassette and chain rings.
Read on to learn about the best clutch alignment tools.
Our Editor’s Best Clutch Alignment Tools Reviews
- Universal alignment kit for centering of the clutch disc.
- Suitable for a wide range of vehicles and some light commercial vehicles.
- Screw action provides fast adjustment for required hub diameter.
- 8 interchangeable spigot adaptors aid close alignment. Adaptors:0.47'', 0.55'', 0.59'', 0.63'', 0.67'', 0.7'', 0.75'', 0.78''(12, 14, 15, 16, 17, 18, 19, 20 mm) diameter.
- 3 x expanding mandrels to align the clutch components. Diameters: 0.59''-0.75'', 0.78''-1.05'',0.9''-1.42'' (15 -19 mm, 20 -26.6 mm, 23 -36 mm)
- Convenient solution - ensure proper alignment during clutch installations and service with this handy alignment tool
- Restores functionality - do the job right the first time with the right tool
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
- Convenient solution - ensure proper alignment during clutch installations and service with this handy alignment tool
- Restores functionality - do the job right the first time with the right tool
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
- Replaces at214
- Made with high quality plastic
- 14 spline shaft, only used with 14 spline clutch discs
- 1-1/4" spline x 1"
- Supports pressure plates & disc assemblies
- Convenient solution - ensure proper alignment during clutch installations and service with this handy alignment tool
- Restores functionality - do the job right the first time with the right tool
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
- Designed to align the flywheel and clutch disc
- Provides trouble-free insertion of the input shaft
- Made from high quality materials
- Eays installation use
- Durable and long lasting
- Convenient solution - ensure proper alignment during clutch installations and service with this handy alignment tool
- Restores functionality - do the job right the first time with the right tool
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
- Convenient solution - ensure proper alignment during clutch installations and service with this handy alignment tool
- Restores functionality - do the job right the first time with the right tool
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
- OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches
- Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines
- Rugged construction will easily support the weight of heavy clutch discs
- To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec
- 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long; similar to Ford 308-D003 (D79T-7550-C)
- ★ The clutch alignment tool is a must have tool for the Ranger XP 900, RZR XP 1000 900, and RZR Turbo owners.
- ★ This tool should be used to check the spacing between the primary shaft & secondary shaft periodically, depending on the frequency of your vehicle use.
- ★ The spacing issues between the primary and secondary shafts can result in poor clutch performance and drastically reduce belt life.
- ★ Save your belt by checking the spacing periodically, increase the longevity of the drive belt and improve durability.
- ★ This tool is also a must when motor and transmission are detached.
Best Clutch Alignment Tools Buying Guide
Before choosing the best clutch alignment tool you should consider following options:
1. Clutch Alignment Bar: This is the most commonly used tool to adjust your clutch.
This is essentially a bar with two hooks on either end. When you have the two hooks on the bar in place on the face of the flywheel, you can then tighten or loosen the clutch nut to achieve the optimum position.
This is the most common method of adjusting the clutch and the one that you will probably find in your mechanic’s toolbox.
2. Clutch Alignment Tool: This is similar to the clutch alignment bar, but it’s much smaller and sometimes a little more complex.
It usually has a clamp that fits around the flywheel, with a bolt in the middle that will move freely. Once tightened, the clutch alignment tool will then move the clutch and allow you to tighten or loosen the nut to achieve the optimum position.
3. Clutch Alignment Jig: This is another type of tool that allows you to get the clutch in the right position.
The jig itself is usually a steel plate, with a hole in the middle and a bolt that moves freely. The clutch is then aligned with the hole in the middle of the jig, and once the clutch is lined up, you can then tighten or loosen the nut to achieve the optimum position.
4. Clutch Alignment Bar with Jaws: This is similar to the clutch alignment bar, but instead of two hooks on the end, there are two clamping jaws.
This allows you to hold the flywheel in place, so you can then tighten or loosen the nut to achieve the optimum position.
5. Clutch Alignment Tool with Jaws: This is similar to the clutch alignment tool, but instead of the clamp, there are two clamping jaws.
6. Clutch Alignment Bar with Clamp: This is very similar to the clutch alignment bar, but with the addition of a clamp.
This allows you to hold the flywheel in place and adjust the clutch at the same time.
7. Clutch Alignment Tool with Clamp: This is very similar to the clutch alignment tool, with the addition of a clamp.
This allows you to hold the flywheel in place and adjust the clutch at the same time.
8. Clutch Alignment Bar with Jaws and Clamp: This is very similar to the clutch alignment bar with jaws, but with the addition of a clamp.
9. Clutch Alignment Tool with Jaws and Clamp: This is very similar to the clutch alignment tool with jaws, but with the addition of a clamp.
10. Clutch Alignment Bar with Clamp and Jaws: This is very similar to the clutch alignment bar with clamp, but with the addition of jaws.
11. Clutch Alignment Tool with Clamp and Jaws: This is very similar to the clutch alignment tool with clamp, but with the addition of jaws.
12. Clutch Alignment Bar with Clamp, Jaws and Rod: This is very similar to the clutch alignment bar with clamp and jaws, but with the addition of a rod.
This rod allows you to accurately gauge the distance from the clamp to the flywheel, so you get the perfect alignment.
13. Clutch Alignment Tool with Clamp, Jaws and Rod: This is very similar to the clutch alignment tool with clamp and jaws, but with the addition of a rod.
This rod allows you to accurately gauge
What else you should know about clutch alignment tools
1. What are the different types of clutch alignment tools?
There are three types of clutch alignment tools: pilot bearing alignment tools, pressure plate alignment tools, and throw-out bearing alignment tools.
2. How do you use a clutch alignment tool?
A clutch alignment tool is used to align the clutch when installing a new clutch or transmission.
3. What are the benefits of using a clutch alignment tool?
A clutch alignment tool is used to properly align the clutch while installing it. This ensures that the clutch will engage and disengage correctly.
4. How do you know when to use a clutch alignment tool?
The alignment of the clutch is important in order to ensure that the clutch functions properly. There are a few ways to know when to use a clutch alignment tool. One way is to simply look at the clutch and see if it is misaligned. Another way is to listen to the sound of the clutch while it is in use. If there is a grinding or squealing noise, then the clutch is likely misaligned and will need to be adjusted.
5. What are some of the best clutch alignment tools on the market?
Some of the best clutch alignment tools on the market include the Snap-on CT8850 and the Cornwell CCT-8850.
Conclusion
On the market, there are numerous best clutch alignment tools. Hopefully, the list of the top ten best clutch alignment tools will save you time researching and deciding on the best one for you.