You can’t wear snowboarding gloves at the same time as wearing snowboard boots, but you can wear gloves at the same time as wearing a snowboarding stomp pad. When you’re shredding at top speed, snowboard boots can be hard on your knees and other joints if you go down a bit harder than you intended to. Snowboard gloves can soften the impact, but they can’t completely protect your joints from the impact of a hard fall. A snowboarding stomp pad can do just that, and more.
Here at shopping we do all the work for you so you can shop from the comfort of your couch. That’s why we’ve researched and turned up the best snowboarding stomp pads for you.
Read on for more.
Our Editor’s Best Snowboarding Stomp Pads Reviews
- Molded spike pattern for maximum traction, Sections can be cut apart and reconfigured
- Peel and stick adhesive
- 100% TPU
- 4.7 x 4.7 [ 120mm x 120mm ] - 2.2 oz [ 62g ]
- Molded spike pattern for maximum traction, Sections can be cut apart and reconfigured
- Peel and stick adhesive
- 100% TPU
- 4.7 x 4.7 [ 120mm x 120mm ] - 2.2 oz [ 62g ]
- Premium TPU Material for Enhanced Durability and Performance: Crafted from high-quality TPU, the same professional-grade material used in top sports equipment, this snowboard stomp pad is built to last. It’s designed to withstand harsh winter conditions without cracking or warping, providing you with long-lasting grip and stability for every ride.
- Cold-Resistant Adhesive for Strong, Secure Hold: Our upgraded adhesive can withstand extreme temperatures down to -40°C, ensuring the snowboard traction pad stays firmly in place even in the coldest weather. Say goodbye to pads that peel off mid-ride—this pad’s secure hold lets you shred with confidence.
- 3D Anti-Slip Design for Maximum Grip: Featuring a 3D textured surface, this stomp pad delivers excellent traction to keep your boot steady. Whether you’re stepping on and off the lift or maneuvering down the slopes, the enhanced grip helps prevent slips, giving you better control. Plus, the transparent design of our clear stomp pad preserves the look of your board’s graphics.
- Easy Installation with Clear Instructions: Installing the stomp pad is a breeze. Simply clean the area, peel off the backing and press down firmly. The TPU material molds seamlessly to your board for a bubble-free, secure hold, getting you ready for the slopes with minimal hassle. Warming up the pad and board with a hair dryer before installation can enhance the bonding effect
- Flexible Placement for Custom Traction: This stomp pad comes in 3 separate pieces, allowing you to place each one exactly where you need it. Customize the layout to match your boot size and riding style, creating a larger contact area for extra grip. Enjoy personalized traction and control for a smoother snowboarding experience.
- Package include:you will get 2 sets of different snowboard stomp pads, suitable for your winter snowboarding.Enough for your daily use and replacement.Improve your outdoor snowboarding safety.
- 3D design:The clear Anti-Slip stomp pad features a 3D raised design,Increase friction, effectively improve skid resistance, provide maximum grip and traction.Transparent design that won't obscure the pattern of your snowboard.
- Safe material:Made of high quality PVC material,strong and durable, not easy to fracture and deformation,can effectively scrape the snow on your sole. Add more fun to your snowboarding trip.
- Easy to install:Wipe the paste area clean, and then use the complimentary double-sided adhesive paper to fix the non-slip pad on the snowboard. Due to the low winter temperatures, you can use a heat gun or hair dryer heating plate and adhesive before pasting, which will ensure greater bonding.
- Tips:If you are not satisfied for any reason, just return for a refund of your purchase price; we promise 24 hours customer support, please feel free to contact us for any product&order problem.
- Durable Material: Our snowboard anti slip pads are made of zinc alloy, which is sturdy and durable, not easily broken or deformed. Improve the safety of outdoor snowboarding
- DIY Pattern: Our metal stomp pads are designed with tall spikes to increase friction, and the quantity is large enough for you to DIY stick them into your favorite shape. You can choose to put them together or unfold them to increase the available grip area. When your hind foot breaks free from the constraints of the snowboard, it can provide you with some grip
- Installation Method: Wipe clean and then use double-sided adhesive to fix the stomp pad on the snowboard. Due to the lower temperature in winter, a hair dryer can be used to heat the plate and adhesive before pasting, which will have greater stickiness. Determine the position where your hind foot is detached from the strap and stepped on, which is where you should secure the step pad. Place a heavy object on it and leave it on for 24 hours, and you will get a perfect ski step pad
- Package Includes: You will receive 18Pcs 17 * 17mm black stomp pads and 1 sheet of 50Pcs 15 * 15mm nano double-sided tape. You can change various patterns according to your mood to match your snowboard, which is sufficient for daily use and replacement, convenient to carry, and can also be shared with family and friends
- Excellent Traction: Firstly, our stomp pad stud is the scraper for the boots. Secondly, your foot is very secure while out of the bindings getting off the lift, it has great traction. Or when you want to practice single footed skiing, the snowboard pad will easily grab onto your boots. It still works well when there is a lot of snow on your winter skiing
- LIGHT WEIGHT, HiGH IMPACT, THERMOPLASTIC, SNOWBOARD STOMP PAD - Molded 7mm spikes provide great grip for boots, with a smooth finish that won't abrade or tear clothing or gloves when carrying your board.
- HEAD BACK TO THE 90s WITH THIS GAME BOY 6" x 5" [ 15cm x 12.5cm ] STOMP PAD - A video game you hold in your hand? That's crazy talk! Hope you can still shred with Tetris music stuck in your head.
- EASY TO APPLY - We only use the best Pressure Sensitive Adhesive, so your stomp will stay stuck down on any type of smooth or textured top sheet.
- INSTRUCTIONS - Make sure board is clean, dry and warm. Test place stomp in front of rear binding, and mark corners with pencil. Carefully remove backing paper and place the stomp pad. Press down with firm pressure over the entire pad. Let dry overnight.
- Because the for 3M adhesive is very strong, it helps prevent the product from falling off even in low temperatures. However, this also makes the release liner a bit hard to peel off. Please warm the surface with a hair dryer before use for easier application.
- Sufficient Quantity: you will receive 9 pieces of snowboard stomp pads, they are suitable for most snowboards, sufficient quantities to meet your daily use and replacement demands, you can also share them with others
- Easy to Use: the spike stomp pad is designed with a self adhesive back, you just need to peel the backing and paste it on where you want, convenient for you to use; Please remove the dirt on the snowboard and dry it before installation, and you can put some heavy objects on it and keep it indoors for a period of time to ensure the adhesion is firm
- Wide Range of Usages: the snowboard grip pad can not only increase friction to provide extra traction of your snowboard, bringing you a nice ski experience, you can also paste it on most furniture, which can avoid the noise caused by abrasion and collision, meeting your diverse needs
- Meet Your Personality Needs: you can stick these snowboard studs on the right position of the snowboard according to your preference, customizing your own typesetting for your snowboard, they can work in cold and inclement weather, helping you stay in good shape on the slope
- Molded lightweight EVA foam (100% recycled EVA)
- 3M high grade peel and stick adhesive
- Premium TPU Material for Enhanced Durability and Performance: Crafted from high-quality TPU, the same professional-grade material used in top sports equipment, this snowboard stomp pad is built to last. It’s designed to withstand harsh winter conditions without cracking or warping, providing you with long-lasting grip and stability for every ride.
- Cold-Resistant Adhesive for Strong, Secure Hold: Our upgraded adhesive can withstand extreme temperatures down to -40°C, ensuring the snowboard traction pad stays firmly in place even in the coldest weather. Say goodbye to pads that peel off mid-ride—this pad’s secure hold lets you shred with confidence.
- 3D Anti-Slip Design for Maximum Grip: Featuring a 3D textured surface, this stomp pad delivers excellent traction to keep your boot steady. Whether you’re stepping on and off the lift or maneuvering down the slopes, the enhanced grip helps prevent slips, giving you better control. Plus, the transparent design of our clear stomp pad preserves the look of your board’s graphics.
- Easy Installation with Clear Instructions: Installing the stomp pad is a breeze. Simply clean the area, peel off the backing and press down firmly. The TPU material molds seamlessly to your board for a bubble-free, secure hold, getting you ready for the slopes with minimal hassle. Warming up the pad and board with a hair dryer before installation can enhance the bonding effect
- Flexible Placement for Custom Traction: This stomp pad comes in 3 separate pieces, allowing you to place each one exactly where you need it. Customize the layout to match your boot size and riding style, creating a larger contact area for extra grip. Enjoy personalized traction and control for a smoother snowboarding experience.
- Clear aluminum Spike stomp pad has a transparent traction mat so the graphics of your snowboard won’t be covered. It also comes with 3M adhesive so it sticks really well. The raised ridge and spot works really well in providing extra traction and scraping the snow off your boot sole.
- MODULAR AND CONFIGURABLE MAT STOMP:10pcs aluminum spikes on stomp pad Provides Extra Grip and perfect Traction, easily cut 2pcs configurable pieces and moved to perfect traction, where you need it.
- QUICK & EASY APPLICATION:3M Peel,stick adhesives and a adhesion promoter that for Using to increase the bond strength of snowboard surface.
- MAXIMUM TRACTION:The aluminum spike design creates extra grip for maximum traction when out on the slopes.
- BIG SIZE:The size of this pad : 5.1 x 4.3 inches, big enough to provide enough grid and yet it could still fit nicely on the board.
Best Snowboarding Stomp Pads Buying Guide
Before choosing the best snowboarding stomp pads you should consider following options:
1. Pad size: Stomp pads vary in size, but you’ll want to choose something that will not only fit your board and bindings but also your body.
Think about how you’ll be riding and the kind of terrain you’ll be hitting when choosing a pad size. If you’re a bigger guy, you may want to opt for a larger pad to prevent smashing your toes. If you’re smaller, you may want to choose a smaller pad, so it’s easier to maneuver your board.
2. Grommet system: Grommet systems are typically found on beginner stomp pads and are useful for giving a bit of clearance when learning to ride.
These are made of a single piece of EVA foam and typically have three or four grommet holes punched in them.
3. Standard stomp pad: This is the most common type of stomp pad and typically has eight to ten grommet holes punched in the EVA foam.
4. Stomp-lock stomp pad: This is a more advanced stomp pad and is typically used by more experienced riders.
This type of pad has multiple sections of EVA foam that interlock and gives the rider more support when riding.
5. Size and thickness: The standard thickness for stomp pad is 1/2 inch, but you can typically find anything from 1/8 inch to 3/4 inch.
When it comes to size, stomp pads range from 16 inches to 24 inches. The larger the pad, typically the more support you’ll get.
6. Grippage: This is a key feature of stomp pads, but it’s something you probably wouldn’t think about until you’ve already purchased one.
When you’re riding, you want a pad that has excellent grippage so it stays in place while you’re riding.
Some stomp pads have a rough or smooth top to help with this, while others have a textured bottom for a better grip.
7. Portability: Stomp pads are typically made of EVA foam, which is lightweight and easy to carry.
While it’s unlikely you’ll be carrying your stomp pad around, having the option to do so is a good thing.
8. Durability: You want a stomp pad that will last you a long time, so it’s worth investing in one that is durable.
The higher quality the materials, typically the longer the pad will last you.
9. Price: Stomp pads range in price from $10 to $200. It’s worth investing in a high quality, durable stomp pad that will last you a long time if you can afford to do so.
What else you should know about snowboarding stomp pads
1. What are stomp pads and why are they used?
Stomp pads are small pads that are placed on the top of a snowboard, near the back binding. They provide traction for the rider’s back foot when doing tricks, and can also be used to help get the rider’s back foot into the binding.
2. How do you install stomp pads on your snowboard?
Stomp pads are usually pressure-sensitive adhesives that are applied to the top of the snowboard near the binding.
3. What are the different types of stomp pads available?
There are many different types of stomp pads available on the market, but the most popular ones are made from a variety of materials, including rubber, plastic, and even metal. Some stomp pads are even made from recycled materials.
4. How do you choose the right stomp pad for your snowboard?
The best way to choose a stomp pad is to ask someone at your local snowboard shop. They will be able to help you find the right size and style for your board.
5. What are some tips for using stomp pads effectively?
Some tips for using stomp pads effectively include:
– Make sure the stomp pad is properly attached to your board before attempting any tricks.
– Use the stomp pad to help you keep your balance while performing tricks.
– Use the stomp pad to help you get more height when performing jumps.
– Experiment with different stomp pad designs to find one that works best for your riding style.
Conclusion
On the market, there are numerous best snowboarding stomp pads. Hopefully, the list of the top ten best snowboarding stomp pads will save you time researching and deciding on the best one for you.