At some point, most drone enthusiasts will have to replace the factory installed servo gears because they either strip too easily or don’t have the torque to move their drone’s camera smoothly. Luckily, there are a number of different gears to choose from, selling for anywhere from $7 to $20. However, it can be hard to tell which ones are the best for your drone. That’s why we decided to do some research and find the best rc servo gears.
Here are our top picks.
Our Editor’s Best Rc Servo Gears Reviews
- 270° Digital Servo: built-in brush motor and stable motherboard, precise angle without deviation.
- Control System: change of pulse width. Pulse range 500usec - 2500usec for 0° - 270° (90°--1166usec, 180°--1833usec).
- High Performance: high quality aluminum gear equipped with double ball bearing, less noise, more stable torque. After the upgrade of RC Servo, two functions are added, which can be automatically protected with anti-burning and rotor blocking protection; 5S overload protection, 70 ℃ overheat protection
- Large Torque: it reacts quickly and the maximum torque is up to 22.8kg·cm (316.63oz·in) at 6.8V.
- Application Fields: suitable for airboats, 1:8 / 1:10 rc cars, robots, intelligent DIY, also rigid wings, helicopters, and other RC models.
- ▶Upgraded Version - advanced linearity and accuracy with precision potentiometers,stable,low noise,water-proof
- ▶Large Torque - maximum torque is up to 21.5 kg.cm (298.5 oz.in)@6.8V
- ▶High Quality - equipped with strong copper & aluminum gears,CNC aluminium middle Shell
- ▶High Rotation - well-controlled, 270 degree rotation. 360 degree rotation when power-off, perfect for robot joint activities
- ▶Dimensions - 1.58x0.79x1.60inch (40x20x40.5mm);Weight: 60g (2.12oz) only
- The MG996R servo motor offers an increase in speed, tension and precision over the SG90 and MG90S micro servo motors. This high-speed standard servo motor can rotate 180 degrees (90 in each direction).
- MG996R is compatible with most standard receiver connectors, suitable for Futaba, Hitec, Sanwa, GWS, etc. It is a digital standard servo with excellent performance.
- MG996R servo torque is 6V 12 kg·cm, 7.2V 13 kg·cm. Operating speed: 4.8V no-load 0.17s/60 degrees; 6.0V no-load 0.13s/60 degrees. Recommended voltage: 5V, current use: 3A.
- Stable anti-vibration coreless motor, metal gear, longer service life. External adapter power supply, cable length: about 30CM. Wiring: orange: signal wire, red: positive pole, brown: negative pole.
- Widely used in biped robots, mechanical arms, remote control boats, suitable for 50-90 methanol fixed-wing aircraft and 26-50cc gasoline fixed-wing aircraft and other models.
- Good performance digital standard Deegoo-FPV servo, which can be a common use for robots, mechanical arms, climbing cars and remote control toys
- This high-speed standard servo motor can rotate 180 degrees (90 in each direction)
- Stall Torque: 6V, 13 kg·cm; No-load Speed: 4.8V: 0.17 s/60°, 6V: 0.13 s/60°; Operating Conditions: 5V, 2A; 5V, 1A; 6V, 1A
- Connector wire length 300mm. Stable and shock proof double coreless motor, metal gear, ball bearing design,Through external adapter
- This servo offers a full range of 180° with metal gears. Application:RC robot, airplane control, robot arm and boats. Fit for all kind of R/C toys and experiments
- 25kg Servo: rc servo high torque built-in brush motor and stable motherboard, precise angle without deviation.
- Servo Motors: servo motor high torque matal gear equipped with double ball bearing, less noise, more stable torque. After the upgrade of RC Servos, two functions are added, servos for rc cars can be automatically protected with anti-burning and rotor blocking protection; 5S overload protection, 70 ℃ overheat protection.
- High Torque Servo Motor：it reacts quickly and the maximum torque is up to 27.5kg,cm At 8.4V. Waterproof servo, Full metal gear servo rc car servo, quiet servo motor, light weight, Running 270°degree servo.
- Rc Servo: 25kg digital servo have high torque, high speed, fast response, stable performance, strong anti-interference ability, and fast heat dissipation.
- Application Fields: servo rc suitable for airboats, rc car, robots, intelligent DIY, also rigid wings, helicopters, and other RC models.
- DS3235 35KG Coreless Stainless Steel Gear Waterproof Digital Servo
- High reliability、good stability、strong adaptability, Low noise、small vibration、smooth operation、long life
- Copper & Aluminum / Stainless Steel & Aluminum
- High performance digital standard servo,High-precision metal gears （Stainless steel gear）with hard anodizing
- CNC aluminium middle Shell,Dual ball bearings
- MG90S Micro Servo Motor, updated SG90 serve motor.
- Stall Torque: 2.0kg/cm(4.8V). Operating Speed: 0.11 seconds/60 degrees (4.8V).
- Operating Voltage 4.8V - 6V. Operating Temperature: 0°C to +55°C. Dead Zone Width：5 Microseconds
- Metal Gear: Aluminum metal teeth, coreless motor, double ball bearin. Metal Gear with less noise for added strength and durability.
- Wide Applications: Tiny and lightweight with high output, this mini small micro servo is perfect for RC airplanes, helicopters, quadcopters,boat, car, electronics DIY or robots.
- Note: LD-20MG model has been renamed as HPS-2018MG as part of our brand's upgrade.
- 20kg-180°High Torque Servo Motor: This rc servo boasts a maximum torque of 20KG.CM 7.4V, enhanced by its accompanying metal servo arm. Delivering robust power, it is housed within an anodized aluminum case that facilitates excellent heat dissipation and effectively reduces power consumption.
- Superior Quality & High Performance: This digital RC servo comes with metal gear and dual-ball bearings, which are well-made with exceptional performance, stability, and minimal noise output. By integrating a high-precision potentiometer, its accuracy and linearity are greatly enhanced leading to an extended service life.
- Perfect Servo for Model DIY & IP67 Waterproof: It fits 1/6 1/8 1/10 1/12 RC cars, robots, vehicle/boat/airplane models, and any DIY. Crafted with high precision and thorough sealing, this rc servo provides IP67 water resistance, which allows it to operate even in the presence of water splashes.
- Size & Weight: Size: 40*20*40.5mm (1.57*0.8*1.59inch); Weight: 68g (0.15 pound).
- Beffkkip MG90S Micro Servo Motor, updated SG90 serve motor.
- Stall Torque: 2.0kg/cm(4.8V)
- Operating Speed: 0.11 seconds / 60 degrees (4.8V)
- Metal Gear with less noise
- Structural Material: Aluminum metal teeth, coreless motor, double ball bearin
- [40KG Digital RC Servo ]--DS3240 full metal gear stainless steel gears digital rc servo. Operating Voltage: 4.8 -6.8 DC Volts ; Stall Torque (5V): 36kg/cm , Stall Torque (6.8V): 45kg/cm ; Speed : 0.2 sec/60°(5V) / 0.17 sec/60°(6.8V) ; Dead band: 3μs ; Control Angle:270 Degree(500-2500µs)
- [Wide Application]--It can be widely used in rc airplanes, helicopters,fixed wing, quadcopters, aircraft,,automobiles,glider, boats, robot arm and other diy electronic project ect. Also perfectly compatible with 1/8 1/10 baja crawler rc car buggy truck ect
- [High Quality and Performance]--Equipped with High-precision Stainless Steel Gear and Potentiometers , High-resolution Digital Chip, Waterproof Rubber Seals Screws.,CNC aluminium middle shell. Low noise, fast heat dissipation, high torque, compatibility and responsiveness
- [PWM Control System ]-- PWM (Pulse Width Modulation) Controlled. The maximum control angle is 270 degree when pulse width 500µs-2500µs. So please make sure your controller can reach 2500µs
- [Package Included]--2 X DS3240MG 40KG Digital RC Servo 270 Degree ; 2 X 25T Adjustable Metal Servo Arm ; 2 X Acessories Bag
Best Rc Servo Gears Buying Guide
Before choosing the best rc servo gears you should consider following options:
1. Application: The first thing you need to figure out is the application for which you need the servo gears. This will help you decide the kind of servo and the number of servos you need.
Servo types include standard, continuous, high-speed, ultra-high-speed and standard plus. You can get more details about the different kinds of servo gears from the manufacturer’s datasheets.
2. Power Requirement: The power requirement of the servo gears depends on the load that they have to bear as well as the speed at which they operate.
Higher speed and higher load mean higher power requirement. The maximum power a servo can consume is given in the datasheet.
3. Gear Ratio: You need to determine the gear ratio to get the speed and torque you want. You can get the standard gear ratios from the manufacturer’s datasheet and you can also get custom gear ratios.
4. Encoder Type: An encoder can be a standard incremental or absolute. The standard incremental encoder is widely used in most applications.
You can also get binary, quadrature and hybrid encoders. The encoder you need depends on the application you have in mind.
5. Cost: Servo gears are available at different price points. This depends on the features and functionality that the gears have.
You can get standard servo gears for $20 to $30. High-end servo gears can cost $100 to $300.
What else you should know about rc servo gears
1. What are the benefits of using rc servo gears?
There are many benefits to using rc servo gears. They are very strong and can withstand a lot of force, meaning that they are ideal for use in rc cars and trucks. They are also very precise, meaning that they can be used to control a wide range of movements.
2. What are the different types of rc servo gears?
There are three types of gears used in radio controlled servos: plastic, metal, and composite. Each type of gear has its own advantages and disadvantages.
Plastic gears are the lightest and cheapest option, but they are also the weakest. Metal gears are much stronger, but they are also much heavier and more expensive. Composite gears are a mix of plastic and metal, offering a balance of strength and weight.
3. How do rc servo gears work?
RC servo gears work in a similar way to regular servo gears, except that they are controlled remotely. This allows for more precise control over the movement of the servo, and can be used to create more complex movements.
4. What are the applications of rc servo gears?
The applications of rc servo gears are found in many industries, including automotive, agriculture, construction, and robotics.
5. What are the limitations of rc servo gears?
The main limitation of rc servo gears is that they are not very strong and can break easily.
Conclusion
On the market, there are numerous best rc servo gears. Hopefully, the list of the top ten best rc servo gears will save you time researching and deciding on the best one for you.