The right outboard motor not only makes the boating experience more enjoyable but it also provides the propulsion necessary to enjoy boating to its fullest. But before you can decide on the right motor for you, you need to find the right mounting system.
To help you find the right motor for your boating needs, we’ve rounded up the best outboard motor brackets. These systems are durable and highly adjustable, and they make it possible for you to install your outboard motor regardless of where the fuel tank is located.
Read on to find the best outboard motor brackets for you.
Our Editor’s Best Boat Engine Outboard Motor Brackets Reviews
- Marinebaby Heavy Duty aluminum Motor Bracket Suitable for 2-stroke Motors 7-1/2 HP to 20 HP,
- Stainless Steel Springs Counter-balance Motor Weight, Solid polypropylene mounting board
- 5-position Locking Height Adjustment From 195mm-320mm
- Broad Size: 8" * 10.2" (205mm*260mm) Mounting Size 5.2” * 9” (132mm*230mm)
- Supper corrosion and strong endurance, fit your motor perfectly
- Adjust your trolling or auxiliary motor to five vertical running positions for changing water or load conditions
- The anodized aluminum bracket is built to handle the increased weight and torque output of today’s four strokes with long or short shafts
- Fit type: Universal
- Handles up to 35 HP, 263 lbs. motors with 10" of travel
- Heavy Duty Boat Motor Bracket Suitable for 2-stroke Motors 7-1/2 HP to 20 HP,
- Broad Size: 8" * 10.2" (205mm*260mm) Mounting Size 5.2” * 9” (132mm*230mm)
- Supper corrosion and strong endurance, fit your motor perfectly
- Stainless Steel Springs Counter-balance Motor Weight, Solid polypropylene mounting board
- 5-position Locking Height Adjustment From 195mm-320mm
- High Quality Material: Made of heavy duty aluminum. The exterior finish is powder coated. Provide strength and durability in marine environments. Lightweight enough not to excessively increase the total weight of the ship. The 20" Outboard Single Engine Bracket is universal design to compatible with Mercs Yamaha Evenrude Honda Johnson Boats
- Feature: Powder coating can form a long-lasting and durable surface, resistant to fragmentation, scratching, fading, and corrosion. This makes it very suitable for use in marine environments, as exposure to salt water, ultraviolet radiation, and other harsh conditions can quickly degrade unprotected surfaces
- Function: The outboard engine bracket is an installation device used to connect the outboard engine to the transverse frame (rear) of the ship. It serves as a structural support, enabling the outboard motor to be firmly fixed on the ship while providing appropriate alignment and clearance in the water
- Package: 1 × outboard engine bracket and installation accessories. Note: There is no instruction. Dimension: 20" setback; 17 1/2" wide x 19 1/2" high. Please verify the product dimension and fitment before purchasing
- Installation: Screw installation. Professional installation is highly recommended. Proper installation is crucial to ensure that the bracket can withstand the forces and vibrations associated with operating the outboard motor
- OUTBOARD MOTOR BRACKET ALUM -20HP MAX
- Specifications : Board Area 260 x 205mm(10-1/4" x 8"), Mount area on boat 135 x 230mm (5-1/4" x 9"), Mount holes 8mm, Lift range 340mm (13-3/8");
- Outboard motor bracket suits 2-stroke motors 7 1/2 - 20 HP, with a maximum weight of 52kg (115lbs), Ideal for small to medium sized powerboats and yachts;
- Anodised aluminium construction; Solid polypropylene mounting board;
- Mounting holes have a horizontal distance of 100mm across (centre to centre), and multiple vertical holes for different mounting options;
- Note : You can get the most friendly customer service, please feel free to contact us if you encounter any problems during use, 90 days free return or refund.
- Designed to hold small outboards up to 8 HP- 2 cycle upright on the stern rail
- injection molded Nylon polypropylene rail mount outboard bracket
- .It fits rails up to 1" and includes stainless steel mounting bolts.
- It can also be used as a mounting platform for barbecues, downrigger brackets, fish cleaning tables, etc
- Overall is made of Aluminum, Base is made of Plastic. Hp rating: 7-1/2 to 20, Broad Size: 8-1/4” × 10-3/8”, Mounting Size: 5-1/4” × 9”, maximum weight is 52kg (115lbs).
- Retractable bracket easy to drive and auxiliary motor on sailing, with reinforced welded frame and stamping stainless steel parts.
- Spring loaded 4-position Locking Height Adjustment, Wide track body for added stability.
- Solid Polypropylene Mounting board. Easy to lift-heavy spring helps balance motor weight.
- Perfect for small to medium sized powerboats and yachts.
- APPLICATION -- Designed for clamp-on mount outboard motors up to 35 HP. Suitable for skiffs, aluminum boats, and inflatables. This cast aluminum offset type jack plate allows mounting of long shaft motors to shorter shaft transom boats.
- WOODEN BLOCK INCLUDED -- Same as MJ-1-DP Jack Plate, Wooden Block Model # WOOD0002. Jack plate comes with pre-cut and pre-grooved wood block for a perfect fit. Ensure more firm and reliable installation of the motor.
- FUNCTION -- Extends 4" off transom. Small boat that made for short shaft outboard engine equipped with a long shaft engine which results in not optimal performance and handling. This jack plate is designed to firmly attach to the transom and provides a higher mounting position for the engine.
- BENEFITS -- Improves performance and handling of smaller or lighter boats. Allows long shaft motors mount to shorter shaft transom boats. Making the boat drive faster.
- 4" SETBACK -- The jack plate extends 4" off transom. Engine mounting surface is 11-1/2" wide x 10" high, and features 4" Setback and 3" Vertical Offset. The overall width of transom mounting flanges is 17". Max weight capacity: 150 lbs. Max Horsepower: 35 HP.
- Works with 4- and 2-Stroke motors up to 35 HP and 263 lbs. max weight (119kg)
- Rugged polypropylene mounting board
- Includes stainless steel mounting hardware and safety cable
- Do not use without safety cable
Best Boat Engine Outboard Motor Brackets Buying Guide
Before choosing the best outboard motor brackets you should consider following options:
1. Mounting position: Outboard engines are available in either transom- or stern-mounted position.
A transom-mounted engine is easier to transport because the entire engine and brackets can be lifted off the boat for transportation.
A stern-mounted engine is easier to use for propulsion because the propeller is entirely below the waterline.
2. Amount of space: All boat engine brackets have some degree of limited space for installation, but you should think about your available space and make sure the new engine you purchase will fit.
If you have a limited amount of space, try to purchase a new engine that will be as narrow as possible.
A wider engine will cause more resistance in the water. If you have a lot of space, a wider engine may be an option, but keep in mind that it will make the boat harder to maneuver.
3. Weight capacity: You should choose a bracket that can support the weight of your engine, plus any additional gear you plan on mounting on the boat.
If you add too much weight to your engine, the bracket may need to be reinforced. Usually this can be done by welding some steel plates to the existing bracket.
4. Mounting style: There are two types of mounting styles for outboard engines, either 2- and 3-point.
With a 2-point mounting system, the engine is supported by only two points, which is usually the brackets.
A 3-point mounting system has an additional support in the middle of the engine, providing a more stable and secure position.
5. Ease of installation: Some brackets are easier to install than others. You should try to find a bracket that has easy-to-understand directions and can be installed by one person.
6. Warranty: Warranties range from short to long, with long warranties usually meaning higher quality.
What else you should know about boat engine outboard motor brackets
1. What factors should you consider when choosing an outboard motor bracket?
Some factors that you should consider when choosing an outboard motor bracket are the weight and size of the engine, the type of boat, the type of transom, the type of steering, and the type of throttle.
2. How do you properly install an outboard motor bracket?
There are many different ways to install an outboard motor bracket, but most of them follow similar steps. First, you will need to identify the correct location for the bracket on the back of your boat. Once you have found the correct location, you will need to mark the holes for the bracket onto the boat. Next, you will need to drill the holes for the bracket. Finally, you will need to secure the bracket to the boat using bolts or screws.
3. What are the benefits of using an outboard motor bracket?
Some benefits of using an outboard motor bracket are that it can provide easier access to the motor for maintenance, it can raise the motor to help prevent it from being damaged in shallow water, and it can provide a more stable platform for the motor.
4. How do you ensure that your outboard motor bracket is compatible with your boat?
The outboard motor bracket must be properly matched to the size and style of the boat. It is important to select a bracket that is designed for the type of boat you have to avoid problems with the motor or the boat itself.
5. What are the different types of outboard motor brackets available?
There are several different types of outboard motor brackets available, including:
-Trolling motor bracket
-Sailboat motor bracket
-Inflatable boat motor bracket
-Pontoon boat motor bracket
-Jon boat motor bracket
-Canoe motor bracket
-Kayak motor bracket
Conclusion
On the market, there are numerous best boat engine outboard motor brackets. Hopefully, the list of the top ten best boat engine outboard motor brackets will save you time researching and deciding on the best one for you.