There are two types of door plates that are installed on the door frame: a door stop and a door plate. The door plate protects the door frame from banging against the wall and provides a place to hang the door knob, while the door stop prevents the door from hitting the door jamb and prevents the door from constantly opening or closing.
There are a lot of different options for door kick plates. These plates are installed on the door jamb at the height of the doorknobs and are located right at the base of the doorknobs. These plates are usually matched to the door hardware and are made from a variety of materials like wood, metal, and plastic.
Read on for our list of best door kick plates.
Our Editor’s Best Door Kick Plates Reviews
- PROUDLY MADE IN THE USA - All of our durable high quality door kick plates are manufactured in Denver Colorado
- 18GA ANODIZED ALUMINUM PLATE - The entire kick plate is made from anodized aluminum with an oil rubbed bronze finish; anodized aluminum kickplates are extremely durable and high quality
- COMMERCIAL GRADE SCREWS - We use high quality commercial grade screws to prevent stripping for an easy screw mount application
- EASY INSTALLATION - Easy to follow instructions and quality packaging insures your kick plate will go up quickly and easily on your door; each kick plate finish side is also protected by a PVC film for an additional layer of protection
- OUR PROMISE TO YOU - we are so confident of the quality of our premium quality door kick plates that we offer a limited lifetime manufacturer guarantee; if you are unhappy in any way we will replace it so this kick plate is last one you ever buy
- Designed for use on any swinging door to help prevent scuff marks or other damage
- 8 inch x 34 in
- Pre-drilled mounting holes
- Stainless steel finish
- Used on a 36 inch door
- 【Stainless Steel Door Kick Plate】Fixirons Door Kick Plate design to prevent your door from abrasion, scratch or pet paw prints damage the door. Suitable for many kinds of swinging door size
- 【High Quality】Our door push plates are made of 304 Stainless steel, which has excellent Weather & Rust Proof performance, Sturdy and durable for long-lasting protection for your door
- 【Dimension】Length: 16 inch, Width: 4 inch. Fit for interior and exterior door to use
- 【Easy to Install】1.Measure and Choose a proper position to install the metal door plate 2. Install the screws 3. Remove the surface plastic film (Note: The door kick plate with plastic protection film is the front side)
- 【Package Include & Quality Guarantee】4 Pcs Stainless Steel Metal Door Plate with screws. If you have any quality problems please feel free to contact us. After receiving your feedback, we will give you satisfy solution
- Designed for use on any swinging door to help prevent scuff marks or other damage
- 6 inch x 34 in
- Pre-drilled mounting holes
- Polished brass
- One piece aluminum
- Size Accuracy: the door kick plate is about 91.7 x 20.4 cm/ 36 x 8 inches, about 1/32 inches in thickness, with enough thickness, suitable for 36 inch wide doors, whether solid wood or steel doors, it won't look awkward
- Package Includes: the package comes with 1 piece of aluminum kick plate and 12 pieces of matching screws, so you don't need to worry about accessories, and the screws we provide look better when matched with door kick plate
- Quality Material: the strike plates for exterior doors are made of aluminum, with a solid structure, which can withstand the impact of daily knocking; Satin aluminum finish, which is not easy to rust and requires little maintenance; If it gets dirty, just wipe it with soap and water
- Simple Installation: the silver kick plate is pre drilled installation holes, just place the kick plate horizontally and centrally on the door surface, and tighten the screws through the installation holes
- Functional Usage: the aluminum door kickplate can not only protect the lower part of your door from being broken, but also protect your wooden door and paint from being broken by pets at home, and also add a touch of beauty and charm to the outer wall of your home
- Materia: The door kick plate is made of stainless steel in brushed finish, which is rustproof, scratch and corrosion resistant, long lasting and easy to clean
- Self Adhesive: Self adhesive backing makes it convenient to apply (Please wear gloves for protection), just peel off the film and stick at place (Vertically or horizontally installation both feasible)
- Size: 8" W x 34" L, ideal size for 36" doors to prevent scuffing
- Fashion Look: The brushed black finish could match with different kinds of door painting in simple and fashion look
- Suitable for: Redecorating and protecting interior or exterior doors (like front door, swinging door and closet door), from scratching, kicking by pets or people
- National Hardware's kickplates are designed to reduce the amount of damage and stress that your door takes over time.
- Available in matte black, satin nickel or brushed gold.
- Instructions and mounting hardware included for installation.
- Surface-mounted application for easy DIY installation.
- Adding this practical enhancement is an important statement maker.
- 【Quality Material】: Brushed 201 Stainless Steel Material, Not Easy To Fade or Deform Or Rust Or Corrode, Easy To Clean, Ensure Long-Term Use.
- 【Size Information】: 4 in. x 16 in. Width by Length, 18GA/1.2mm Standard Thickness. Please Refer To The Picture For The Dimensions And Compare With Your Needs Before Ordering
- 【Smooth Round Edge Design】: R5 Round-Angle Edge Design, Smooth and Safe, Not Only Protect Door Or Dog Or Dog Puppy Paws, Also Safer For Install. Even Though It's Safer, Please Always Keep In Mind Becareful And Keep Yourself In a Safe Situation.
- 【Easy To Install】: 6 Pre-Punched Mounting Holes With 6 Stainless Steel Screws Include, Just Place The Push Plate In Proper Position, Fasten screws Through Holes to the Door.
- Plentiful Quantity for Usage: you will receive 2 pieces door kick plates in this package, ample amounts easily satisfying your daily use needs; You can also share them with your friends and family
- Provide Trustworthy Quality: made of quality aluminum plate material, the kick plates for exterior doors are not prone to deform or break, serving you for a long time and giving you a nice using experience with confidence
- Easy to install: the metal door panel is easy to install, only 3 steps are needed; Place the kick plate in the appropriate position, with 6 holes on the top and bottom corresponding to 12 screws, tighten the screws in the package, and remove the surface protection to complete the installation
- Widespread Applications: the door plates for exterior doors are designed to be applied on many swinging doors to decorate and help avoid wear marks or other spoils, and can also add a bit of beautiful charm to your home, apartment and more
- Measurement Details: the metal plate door protectors are moderate in size, easy to prevent the bottom of the door from scuffing, proper to match with other supplies, suitable for interior and exterior door applications
- Decrease Scratches: the stainless steel kick plate can be stuck on the bottom of your doors, cabinets and walls, then you do not need to worry about someone or pets leaving rubs on their surface, which helps to decrease the scratches accidentally on door kick plate
- Self Adhesive Tape: the size of the door kick plate is about 15 x 260 cm/ 6 x 102 inches, and the thickness is about 0.4 mm/ 0.02 inches, which is easy to install as there is an adhesive tape on the other side, and when you plan to stick the kick plate, you only need to uncover the covering of the tape and then put it in a certain place
- Stainless Steel Material: the main side of the baseboard cover is made of stainless steel, it is easy to clean, non rusting or corrupting and it can serve you for a long time, which makes your cleaning job easier and more effective
- Warm Notes: it is convenient to cut the kitchen toe kicks with cutter, tin scissors, and other cutting tools (It would be a little difficult to cut with ordinary scissors) the lengths and shapes according to your needs, and you do not need to worry about whether their sizes are suitable for your house
- Widely Applied: the door plate for exterior door can be widely applied to most places, like restaurants, rental house, dessert bar, pets families and more for lessening the using trace made by people or pets; Note: please keep the pasting surface dry and free of dust and dirt before use so that it can stick more firmly; It will bend during transportation; Please flatten it before pasting
Best Door Kick Plates Buying Guide
Before choosing the best door kick plate you should consider following options:
1. Positioning: Before you purchase a door kick plate, you should consider the best place to install it. Although many people like to have the kick plate positioned at the bottom of the door, that is not always the best option.
For instance, if you install the kick plate too close to the floor, it can cause damage to the door. If the door gets stuck and hits the plate, it can bend the hinges and cause the door to crack.
On the other hand, if you position the plate too high up, it can make it difficult for you to open the door. This can cause you to strain yourself when entering and exiting your home.
Ideally, the best place to install your door kick plate is just above eye level. This means that the door will easily close, but you will still have the support needed to open it.
2. Positioning Within the Doorway: You will also have to take into consideration the positioning of the door kick plate within the doorway. The best option is to have the plate centered.
However, if your door is not perfectly centered, you will have to adjust accordingly. It is best to leave at least one inch of space on either side of the door to ensure proper airflow and energy efficiency.
3. Positioning in Relation to the Jamb: You will also have to consider the position of the door kick plate in relation to the jamb.
The closer the plate is to the jamb, the less support you will have when opening or closing the door. This can cause damage to the hinges and the door itself.
On the other hand, if the plate is too far away from the jamb, it can cause your door to hit the wall and make a lot of noise when closing.
Ideally, you should position the door kick plate at a point that is one third of the way in from the edge of the jamb. This will give you the support you need when opening and closing the door, while also leaving enough space for airflow and energy efficiency.
4. Space: You will also have to consider the available space in your doorway. If you have a narrow space, then you will have to adjust the positioning of the door kick plate accordingly.
If you have a lot of space, then you can leave the plate in the original position. No matter what your situation is, you will have to adjust the position of the door kick plate accordingly.
5. Adjusting for the Weather: If you live in a place where the weather changes often, you will have to adjust the position of your door kick plate accordingly.
For example, if you live in a place where it rains often, you will have to make sure that the plate is further away from the jamb. This will ensure that all the water stays on the outside of your door.
If you live in a place that is prone to a lot of snow, you will have to make sure that the plate is closer to the jamb, which will prevent snow from getting stuck in your doorway.
6. Maintenance: Another important thing to consider is the maintenance of your door kick plate. Depending on the material of your door kick plate, you will have to adjust accordingly.
For example, if you have a steel kick plate, you will have to make sure you wipe it down often so that it does not rust. On the other hand, if you have a wooden kick plate, you will have to make sure you repaint it often so that it does not
What else you should know about door kick plates
1.What are door kick plates?
Door kick plates are metal or plastic plates that are mounted on the door at the bottom to protect the door from being kicked or dented.
2.What are they made of?
Most shoes are made from leather, cloth, or rubber.
3.What are the dimensions of a standard door kick plate?
The standard size for a door kick plate is 8 inches by 34 inches.
4.How are door kick plates installed?
Door kick plates are installed by screws or adhesive.
5.Do door kick plates come in different colors/finishes?
Yes, door kick plates come in a variety of colors and finishes to match your door.
Conclusion
On the market, there are numerous best door kick plates. Hopefully, the list of the top ten best door kick plates will save you time researching and deciding on the best one for you.