At some point, most drone enthusiasts will have to replace the factory installed servo gears because they either strip too easily or don’t have the torque to move their drone’s camera smoothly. Luckily, there are a number of different gears to choose from, selling for anywhere from $7 to $20. However, it can be hard to tell which ones are the best for your drone. That’s why we decided to do some research and find the best rc servo gears.
Here are our top picks.
Our Editor’s Best Rc Servo Gears Reviews
- 270° Digital Servo: built-in brush motor and stable motherboard, precise angle without deviation.
- Control System: change of pulse width. Pulse range 500usec - 2500usec for 0° - 270° (90°--1166usec, 180°--1833usec).
- High Performance: high quality aluminum gear equipped with double ball bearing, less noise, more stable torque. After the upgrade of RC Servo, two functions are added, which can be automatically protected with anti-burning and rotor blocking protection; 5S overload protection, 70 ℃ overheat protection
- Large Torque: it reacts quickly and the maximum torque is up to 22.8kg·cm (316.63oz·in) at 6.8V.
- Application Fields: suitable for airboats, 1:8 / 1:10 rc cars, robots, intelligent DIY, also rigid wings, helicopters, and other RC models.
![Deegoo [4-Pack] MG996R 55g Metal Gear Torque Digital Servo Motor for Futaba JR RC Helicopter Car Boat Robot](https://m.media-amazon.com/images/I/41vK0XrtSjL._SL160_.jpg)
- This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase)
- The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc.
- Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor , Metal Gear .
- Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees
- Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects.
- 25KG servo - maximum torque can up to 25kg.cm (6.8V)
- Digital servo features HV high torque, metal gear, fast heat dissipation, sensitivity and responsiveness. With high quality and performance
- High- metal gear with hard anodizing for better accuracy CNC aluminium middle shell enhances heat dissipation and longer service life
- High Quality - equipped with strong copper & aluminum gears,CNC aluminium middle Shell，made of first-grade material
- Standard servo size:40 x 20 x 40.5 mm ( 1.58 x 0.79 x 1.60 in) 1/8 1/10 scale car
- Upgraded version from MG995, control angle upgraded from 180° to 360°, have corresponding increase in speed, tension and accuracy.
- Compatible with most standard receiver connector: Futaba, Hitec, Sanwa, GWS, etc.
- 360-degree servo is equivalent to a stepless variable speed motor, which can control the speed and direction.Stable and shock proof, metal gear
- The control method is the same as the control signal of general servo. Suitable power source for the modification of Wali.
- Mainly used for 1:10 and 1: 8 flat sports cars, off-road vehicles, trucks, big cars, climbing cars, biped robots, manipulators, remote control boats, suitable for 50-90 class methanol fixed-wing aircraft and 26cc-50cc gasoline fixed-wing aircraft and other models.
- ▶Upgraded Version - advanced linearity and accuracy with precision potentiometers,stable,low noise,water-proof
- ▶Large Torque - maximum torque is up to 21.5 kg.cm (298.5 oz.in)@6.8V
- ▶High Quality - equipped with strong copper & aluminum gears,CNC aluminium middle Shell
- ▶High Rotation - well-controlled, 270 degree rotation. 360 degree rotation when power-off, perfect for robot joint activities
- ▶Dimensions - 1.58x0.79x1.60inch (40x20x40.5mm);Weight: 60g (2.12oz) only
- 【Widely Used】: DS3245SG 45kg Full Metal Gear Standard Servo Suitable for RC Off-road Vehicle, Crawler, Mechanical Arms, Robots, Remote Control Boat & Giant Scale Aircraft etc.
- 【Great Heavy-Duty Servo】: Amazing Torque & Fast Performance, Perfect for Heavy-duty RC Vehicle, Maximum Torque Can Up to 51kg.cm(708.2oz-in),Speed sec/60°:0.11@8.4v
- 【Reliable Quality】: Equipped with High-precision Steel Gear and Potentiometers , High-resolution Digital Chip, Waterproof Rubber Seals Screws, Made of First-grade Material and CNC Aluminum Middle Shell Ensure Stable Performance and Long Working Life.
- 【Best Upgrade for your RC Rigs】: Durable, Responsive, Strong Anti-interference Ability, Low Noise, Fast Heat Dissipation.Precision Control, Angle Range from 0 to 270 Degrees. Can be Rotated within 360 Degrees when Power Off, Perfect for Robot Joint Activities. Up to 45mm Long Wire. Free 25T Servo Horn and Accessories
- 【Satisfied Customer Service】: We Are Specialized in Developing and Manufacturing Robot & RC Servo, We Offer Value Price for Bulk Order. If Any Problem with Your Servo or Anything We Can Help, Please Do Not Hesitate to Contact with Us, We Will Try Our Best to Solve it Efficiently.
- DS3235 35KG Coreless Stainless Steel Gear Waterproof Digital Servo
- High reliability、good stability、strong adaptability, Low noise、small vibration、smooth operation、long life
- Copper & Aluminum / Stainless Steel & Aluminum
- High performance digital standard servo,High-precision metal gears （Stainless steel gear）with hard anodizing
- CNC aluminium middle Shell,Dual ball bearings
- The MG996R servo motor offers an increase in speed, tension and precision over the SG90 and MG90S micro servo motors. This high-speed standard servo motor can rotate 180 degrees (90 in each direction).
- MG996R is compatible with most standard receiver connectors, suitable for Futaba, Hitec, Sanwa, GWS, etc. It is a digital standard servo with excellent performance.
- MG996R servo torque is 6V 12 kg·cm, 7.2V 13 kg·cm. Operating speed: 4.8V no-load 0.17s/60 degrees; 6.0V no-load 0.13s/60 degrees. Recommended voltage: 5V, current use: 3A.
- Stable anti-vibration coreless motor, metal gear, longer service life. External adapter power supply, cable length: about 30CM. Wiring: orange: signal wire, red: positive pole, brown: negative pole.
- Widely used in biped robots, mechanical arms, remote control boats, suitable for 50-90 methanol fixed-wing aircraft and 26-50cc gasoline fixed-wing aircraft and other models.
- Servo Equipped with strong Aluminum gear, iron core motor, CNC aluminum middle shell.
- Boundary dimension: 28*13.2*29.6mm (1.1*0.52*1.2 inch);
- Compliant with most standard receiver connector: Futaba, Hitec, Sanwa, GWS etc. Great for truck, Boat, Racing Car, Helicopter and Airplane.
- Torque: 3.2kgf.cm at 4.8V; 3.5kgf.cm at 6V,No load speed: 0.23s/60° at 4.8V; 0.20s/60° at 6V
- Operating voltage: 4.8V ~ 6VDC,Working frequency: 1520 μ s / 333h
- High precision metal gears Micro Servo
- Ideal for robot Plane Helicopter Boat Car
- Ultra Light 13g, Size 23*12.1*23.8mm
- Stall Torque: 2.2kg.cm @ 4.8V,2.8kg.cm @ 6.0V
- Genuine AGF Brand package. Any question please contact us at first time
Best Rc Servo Gears Buying Guide
Before choosing the best rc servo gears you should consider following options:
1. Application: The first thing you need to figure out is the application for which you need the servo gears. This will help you decide the kind of servo and the number of servos you need.
Servo types include standard, continuous, high-speed, ultra-high-speed and standard plus. You can get more details about the different kinds of servo gears from the manufacturer’s datasheets.
2. Power Requirement: The power requirement of the servo gears depends on the load that they have to bear as well as the speed at which they operate.
Higher speed and higher load mean higher power requirement. The maximum power a servo can consume is given in the datasheet.
3. Gear Ratio: You need to determine the gear ratio to get the speed and torque you want. You can get the standard gear ratios from the manufacturer’s datasheet and you can also get custom gear ratios.
4. Encoder Type: An encoder can be a standard incremental or absolute. The standard incremental encoder is widely used in most applications.
You can also get binary, quadrature and hybrid encoders. The encoder you need depends on the application you have in mind.
5. Cost: Servo gears are available at different price points. This depends on the features and functionality that the gears have.
You can get standard servo gears for $20 to $30. High-end servo gears can cost $100 to $300.
What else you should know about rc servo gears
1. What are the benefits of using rc servo gears?
There are many benefits to using rc servo gears. They are very strong and can withstand a lot of force, meaning that they are ideal for use in rc cars and trucks. They are also very precise, meaning that they can be used to control a wide range of movements.
2. What are the different types of rc servo gears?
There are three types of gears used in radio controlled servos: plastic, metal, and composite. Each type of gear has its own advantages and disadvantages.
Plastic gears are the lightest and cheapest option, but they are also the weakest. Metal gears are much stronger, but they are also much heavier and more expensive. Composite gears are a mix of plastic and metal, offering a balance of strength and weight.
3. How do rc servo gears work?
RC servo gears work in a similar way to regular servo gears, except that they are controlled remotely. This allows for more precise control over the movement of the servo, and can be used to create more complex movements.
4. What are the applications of rc servo gears?
The applications of rc servo gears are found in many industries, including automotive, agriculture, construction, and robotics.
5. What are the limitations of rc servo gears?
The main limitation of rc servo gears is that they are not very strong and can break easily.
Conclusion
On the market, there are numerous best rc servo gears. Hopefully, the list of the top ten best rc servo gears will save you time researching and deciding on the best one for you.