If you’ve tried a remote control car and found it skips or veers uncontrollably, it’s probably because the stock axle isn’t up to the job of handling the demands of a powerful RC. Most R/C cars come with a standard plastic axle that’s light and easy to install, but that also makes the car less durable and prone to skipping.
To help you find the best rc vehicle axles, we’ve turned to reviews from real customers on Amazon who have purchased and used these products for themselves. These best-selling items not only have near-perfect ratings, but they also have countless glowing reviews describing why they’re so great.
Read on for the best rc vehicle axles you can buy.
Our Editor’s Best Rc Vehicle Axles Reviews
- Product Size: Rc axles 1/10 shaft length is about 6.6in, the installation hole distance is about 3in, and the adjacent hole distance is about 0.5in. Before purchasing rc 1/10 axles, please check size so that you buy right product
- Metal Material: Metal non powered rear wheel is carefully made of metal material, with a certain hardness, which is sturdy and practical. Rc front axle metal kit have a long service life and can meet your long-term use needs
- Use Precautions: When installing and using rc wheel axle, avoid tightening it too much and locking bearing shaft. Before using rc wheels axle, you can apply lubricating oil to lubricate bearing shaft to make it work more smoothly
- Practical Tool: Remote control axles can not only be used for the rear axle of 1/10 rc trailer, tractors, flatbed trailers to enhance the performance of your vehicle, but it can also serve as little helper for your DIY vehicle
- Easy to Install: Remote control axles rc is light in weight, not only the installation process is simple and quick, but it also has no additional burden on the RC car, which can tear to extend the service life of your 1/10 trailer
- Perfect for 1/10 Axial SCX10 RC Crawler,Fine workmanship and perfect style, Easy to install and remove,
- Enhanced upgrade axle shaft， upgrade the structure and material to enhance the hardness， stronger than old version shaft, steering point not easy to broke ,better performance and durability.
- Material：Machined from aluminum and anodized for good looks,, Steel internal gears and driveshaft .Directly replace Original plastic axles.
- Larger load bearings used around the gear set to reduce flex and create a stronger drivetrain.
- High pinion gears for added ground clearance and better driveshaft angles.
- V2 upgraded version of MEUS Racing ISO axles, suitable for Axial 1/24 RC crawler Axial SCX24 Deadbolt C10 JLU Gladiator Bronco
- ISO V2 brings two key updates: (1) Shoulder screws on steering knuckles to provide better fixment, won't easily fall off. (2) Modifed diff cover, screws can be hidden properly to prevent the axles from being jammed under certain circumstances
- Front axle 67g and rear axle 24g, comes with brass steering knuckles, aluminum servo mount and diff cover, and the axle housing is made of nylon material via injection molding, which provides better flexibility while conquering tough terrains
- US patented (Patent No.: US D1,052,393 S) Isokinetic 3-section CVD effectively/minimizes the jerks when turning at large angles and support max.52° steering angle
- We set +5mm extended in width at each side to the axles to get more clearance while steering thus allowing more tire selections. Front and rear equiped with customized 2-14T gears, by replacing the gears of rear axle to 2-16T gears, you can get 14% underdrive
- [Well Performance] CNC machined and black anodized, excellent workmanship and high precision.
- [Unique design] +4mm axles increase the width of each side by 4mm, increase total length by 8 mm. 4mm extended desgin provides better stability and climbing performance.
- [Upgrade Accessories] Come with Hardened CVD shafts, steel 12/24T gears, 5mm(+1mm) brass wheel hexes and nuts.
- [Pre Assembly] Pre-assembled make installation more simpler, coming with all hardware for the axles.
- [Wide Application] Designed specifically for TRX4M Bronco Defender K10 High Trai 1/18 RC crawler. Note：As the axle housings are extended, so they are not compatible with original TRX4M size steering links and dogbone shafts.
- Product Size: Rc axles 1/10 shaft length is about 6.6in, the installation hole distance is about 3in, and the adjacent hole distance is about 0.5in. Before purchasing rc 1/10 axles, please check size so that you buy right product
- Metal Material: Metal non powered rear wheel is carefully made of metal material, with a certain hardness, which is sturdy and practical. Rc front axle metal kit have a long service life and can meet your long-term use needs
- Use Precautions: When installing and using rc wheel axle, avoid tightening it too much and locking bearing shaft. Before using rc wheels axle, you can apply lubricating oil to lubricate bearing shaft to make it work more smoothly
- Practical Tool: Remote control axles can not only be used for the rear axle of 1/10 rc trailer, tractors, flatbed trailers to enhance the performance of your vehicle, but it can also serve as little helper for your DIY vehicle
- Easy to Install: Remote control axles rc is light in weight, not only the installation process is simple and quick, but it also has no additional burden on the RC car, which can tear to extend the service life of your 1/10 trailer
- TGCWENG RC portal front rear axles housing has a strong compatibility,best choice for 1/10 Redcat Gen 7 SCX10 I II III Pro D90 D110 Etc RC crawler car upgrade parts.
- Enhanced upgrade axle shaft,high pinion gears for added ground clearance and better driveshaft angles,After the upgrade turning points are less likely to break, performance and durability have been greatly enhanced.
- Front and rear portal axle made of high-quality material 7075 aluminum alloy and is made by CNC machine tool with high precision machine, and the internal gear and drive shaft are more precise directly replace Original plastic axles.
- Upgraded portal axles and the modified RC crawler car,Larger load bearings used around the gear set to reduce flex and create a stronger drivetrain.
- TGCWENG is an excellent manufacturer of upgrade parts, which are highly fitted to your RC bike and easy to install, greatly improving the strength and precision.
- 🚗 Material:High quality Alloy Suit For:SCX10 Built for extreme off-road capability that takes you to new places and new adventures.
- 🚗 Advantage:High quality materials ,superb craftsmanship,Lightweight,beautiful shape,durable. Made your car more attractive and cooler.
- 🚗 Machined from aluminum and anodized for good looks Directly replace Original plastic portal axles housing
- 🚗 Lightweight upgrade enhances car's performance in handling and durability, providing unmatched driving versatility
- 🚗 Customer service: If you have any question,please contact us and we will offer professional service to solve your problem
- This portal axles are formed from high-quality nylon and fiber materials by high-precision mold injection molding, surface frosting texture treatment,comes with metal gears and bearings.
- The front axle adopts large-scale c-knuckle design and the rear axle is an integrated structure. At the same time, the caster angle of the front axle is 18.5 degrees and the kingpin inclination angle is 7.5 degrees.This is a perfect angle, which can effectively improve the stability of the vehicle when climbing.
- The ground clearance is increased by 12mm, effectively improving the trafficability and stability.
- Equipped with servo mount and rear link mount, a link is specially equipped for the structure of servo on the beam
- It is a great select for Axial SCX10 SCX10 II 1/10 RC Crawler.
- INJORA portal axles lift the pumpkin to provide ground clearance, diamond shaped pumpkin for more realistic scale look.
- Come with a servo-on-axle lay down servo mount, hardened CVD shafts, 12/24T axle gears, 15/20T portal gears, brass wheel hexes and nuts.
- +5mm axles increase the width of each side by 5mm, increase total length by 10 mm, providing better stability and climbing performance.
- The entire axles have been extended, not just the dogbone shafts, which prevents the dogbone shafts from being overburdened.
- Pre-assembled complete axles. Please grease the axles before installation.
- V2 upgraded version of MEUS Racing ISO axles, suitable for Axial 1/24 RC crawler Axial SCX24 Deadbolt C10 JLU Gladiator Bronco
- ISO V2 brings two key updates: (1) Shoulder screws on steering knuckles to provide better fixment, won't easily fall off. (2) Modifed diff cover, screws can be hidden properly to prevent the axles from being jammed under certain circumstances
- Front axle 83g and rear axle 32g, comes with brass steering knuckles and diff cover, aluminum servo mount and axle housing for overall protection and higher performance while conquering different terrains
- US patented (Patent No.: US D1,052,393 S) Isokinetic 3-section CVD effectively/minimizes the jerks when turning at large angles and support max.52° steering angle
- Front and rear equiped with customized 2-14T gears, by replacing the gears of rear axle to 2-16T gears, you can get 14% underdrive
Best Rc Vehicle Axles Buying Guide
Before choosing the best rc vehicle axles you should consider following options:
1. Steel or composite: Steel is the traditional choice for the backbone of your rc vehicle. It’s affordable, durable and strong. It’s also heavy.
That weight means the suspension and drivetrain have to work harder to move the vehicle, reducing top speed and acceleration. However, that can be an advantage if you’re looking to do more rock crawling.
If you’re looking for the lightest option possible, then you might want to consider a composite axle. They offer much less rotational mass, which means they’re perfect for racing.
The drawback is that they can be more expensive to replace, since you may need to get a whole new axle housing, rather than just a set of bearings.
2. Axle ratio: Axle ratios are the relationship between the tire diameter and the diameter of the driveshaft.
For instance, if your driveshaft is 3 inches in diameter and your tire is 8 inches in diameter, then your axle ratio is 0.375:1.
You wouldn’t want your axle to be too short or too long. Too short and you won’t have enough power to get through the corners. Too long and your vehicle will lose traction.
A good rule of thumb is to get an axle that’s as short as possible, while still having enough power to get through the corners.
3. Differential: Differentials are essential to get your power to the ground in an efficient and effective way, but they’re often overlooked. Differentials come in many different forms, but the most common are open and locked.
An open, or free, differential allows both wheels to rotate at different speeds. If you’ve ever driven on icy roads, you’ll know that this can sometimes lead to one tire spinning.
A locked differential, or limited slip differential, helps to eliminate that spinning, but it also makes the vehicle less maneuverable.
Differentials are necessary for any vehicle that’s going to be cornering at speed, but it’s especially important for off-road vehicles.
4. Gear ratio: The gear ratio is the relationship between the tire diameter and the driveshaft diameter.
For instance, if your driveshaft is 3 inches in diameter and your tire is 8 inches in diameter, then your gear ratio is 0.375:1.
You wouldn’t want your gear ratio to be too short or too long. Too short and you won’t have enough power to get through the corners. Too long and your vehicle will lose traction.
A good rule of thumb is to get a gear ratio that’s as long as possible, while still having enough power to get through the corners.
5. Tire size: Tires play a huge role in how your vehicle performs. They’re the only thing that touches the ground, so it’s important that you get them right.
The first thing you need to do is decide on a maximum tire diameter. That will depend on the space you have to work with and the type of rc vehicle you’re planning to build.
You also need to decide what type of terrain you’ll be driving on and what your driving style is. Are you planning on racing? Are you planning on rock crawling?
That will determine the diameter of tire you go with.
The second thing you need to do is decide
What else you should know about rc vehicle axles
1. What are the different types of rc vehicle axles?
There are many different types of rc vehicle axles, but the most common are:
-Straight axles: These are the most common type of axle and are used on most rc vehicles. They are simple and easy to use, but can be less durable than other types of axles.
-Articulated axles: These axles are used on some rc vehicles and allow for more suspension travel. They can be more difficult to use and are more expensive, but can be more durable than straight axles.
-Torsion axles: These axles are used on some rc vehicles and allow for more suspension travel. They can be more difficult to use and are more expensive, but can be more durable than straight axles.
2. What are the benefits of each type of axle?
The benefits of a beam axle are that it is simple and inexpensive to manufacture, and it is very strong. The benefits of a live axle are that it is more versatile and can be used in a variety of applications, and it is also more comfortable for the passengers.
3. How do you choose the right axle for your rc vehicle?
There are many factors to consider when choosing the right axle for your rc vehicle. The first is the width of the axle. The wider the axle, the more stable the vehicle will be. The second is the length of the axle. The longer the axle, the more wheelbase the vehicle will have. The third is the type of axle. The type of axle will determine the type of suspension the vehicle will have. The fourth is the material of the axle. The material of the axle will determine the strength and durability of the axle.
4. How do you install an rc vehicle axle?
There is no one answer to this question as the installation process for an rc vehicle axle can vary depending on the specific model of rc vehicle that you have. However, in general, the installation process for an rc vehicle axle will involve removing the existing axle from the rc vehicle, attaching the new axle to the vehicle in its place, and then securing it in place with screws or bolts.
5. What are the most common problems with rc vehicle axles?
The most common problems with rc vehicle axles are broken or bent axles, stripped gears, and worn out bearings.
Conclusion
On the market, there are numerous best rc vehicle axles. Hopefully, the list of the top ten best rc vehicle axles will save you time researching and deciding on the best one for you.